Willkommen bei

Sag Was Du Denkst :-)

Starte Unterhaltungen über Themen die Dich schon immer interessiert haben oder stell Fragen und erhalte Antworten von anderen Benutzern der Community.

Wir vergeben 15 Euro Prämie für den Monatsaktivsten :-)

  1. Deniz86

    1270 Punkte

  2. Elias

    990 Punkte

  3. Karma

    980 Punkte

  4. eyuphan

    440 Punkte

Prämien je Monat
Platz 1: 15 €

auxmoney.com - Kredite von Privat an Privat

China Filter Hot Melt Adhesive factory

0 Punkte
Product name:Hot Melt Glue Granules
Product no.:OODA -311
Appearance:Light yellow granules
Softening point:98℃ ± 3℃
Viscosity(180℃):14000 ± 500 CPS
Components:EVA resin, tackifying resin, paraffin, additives, etc
Features:All type plastic film laminating / High softening point / Can replace pressure sensitive adhesives
Applicationaper products / Furniture / Packing and carton sealing / Plastic film laminating/PE film box
Usage:1.Temperature control: The operating temperature is usually controlled between 160 ℃~ 180 ℃, but not exceed 220 ℃. Check the temperature regularly, and use laboratory thermometer , metal thermometer, electrode thermometer directly and systematically. If necessary, readjust it again. Because of long time working,, the thermometer installed on the machine may give the wrong information.
2.Lining speed: 12~15 m/min, according to the width of the edge, low speed can lead to errors.
3.The consumption of hot melt adhesive for sealing side: 300~400g/m2.
Packing & StoragePaper bags packing, 25Kg/bag. Stored in a cool and dry place, storage period is two years
Note:1.Opening and curing time will vary with the temperature at which the adhesive is heated, coating amount, sticking period and the strength.
2.The temperature of the melting system is high, please do not touch it with your hand in order to avoid scald.
3.If the glue drop on the skin, the burnt part should be immediately immersed in cold water for at least 15 minutes and then sent to hospital to be treated.
Waste Disposal Methods1.Refer to relevant laws to deal with.
2.According to the conditions of warehouse to store the wastes to be processed.
3.Using specific incineration or sanitary landfill to deal with the wastes.China Filter Hot Melt Adhesive factory
asked in Musik by hjy (280 Punkte)

Deine Antwort

Your name to display (optional):
Privacy: Your email address will only be used for sending these notifications.
Anti-spam verification:
To avoid this verification in future, please log in or register.